Search Thermo Fisher Scientific
Bench Protectors
Thermo Scientific Surface Protectors can help make your lab a safer place.
Thermo Scientific Versi-Dry bench protectors quickly absorb and contain spills and cushion breakable labware. Use Versi-Dry material as a bench protector, shelf liner, cabinet liner or for wiping up isolated spills. The skid-resistant polyethylene backing protects your benchtop and other lab surfaces from damage and contamination caused by liquid drips and spills. The cloth-like top layer is long lasting and will not fall apart, even when wet. Thermo Scientific Nalgene CleanSheets are made of 0.125" (3.2mm) thick closed-cell polyethylene foam and can be used as a bench, drawer or sink liner or as a titration background. CleanSheets provide cushioning and non-absorbent liquid barrier protection.
Which surface protector is best for you?
| Versi-Dry Surface Protectors | Super Versi-Dry Surface Protectors | CleanSheets Surface Protectors |
| Absorbs 750mL of liquid/m2 | Absorbs 1,050mL of liquid/m2 | Non-absorbent |
 |  |  |
| Mat sizes: 46 x 51cm; 18 x 20 in. | Mat sizes: 46 x 51cm; 18 x 20 in. 46 x 102cm; 18 x 40 in. 51 x 110cm; 20 x 43 in. | Mat sizes: not available in mats |
Roll sizes:
51cm x 30m; 20 in. x 100 ft. 51cm x 46m; 20 in. x 150 ft. 51cm x 91m; 20 in. x 300 ft. |
Roll sizes:
51cm x 30m; 20 in. x 100 ft. 51cm x 76m; 20 in. x 250 ft. 102cm x 61m; 40 in. x 200 ft. | Roll sizes: 31cm x 15.2m; 12 in. x 50 ft. 46cm x 15.2m; 18 in. x 50 ft. |
| White fibrous top layer | Blue fibrous top layer | NA |
| Polyethylene backer | Polyethylene backer | White 0.125" (3.2mm) thick closed-cell polyethylene foam |
Thermo Scientific surface protectors offer protection from the following chemical spills:
Acetone
Hydrofluoric Acid, 10%* Potassium Hydroxide, 30%* Ammonium Hydroxide, 30%* Methylene Chloride Sulfuric Acid, 10% Chlorine Bleach |
Methyl Ethyl Ketone (MEK)
Sodium Hydroxide, 10N* Chlorobenzene Methyl Iso Butyl Ketone (MIBK) Toluene Chloroform |
Mineral Spirits
Xylene Ethanolamine Nitric Acid, 10%* Hydrochloric Acid, 10%* Phosphoric Acid, 10%* |
*Highest concentration tested
Resources
Certificate of Compliance
Receive a Certificate of Compliance and Certificate(s) of Irradiation (if applicable) on purchased Thermo Scientific Nalgene and Nunc products.
Support
For a more detailed chemical resistance guide by chemical and application temperature, please refer to the Nalgene Chemical Resistance Wall Chart or contact technicalsupport@thermofisher.com.
California Proposition 65 Warning: Products manufactured with polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate glycol (PETG) or polystyrene (PS) contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.