Test tube racks
Rely on Thermo Scientific plastic test tube racks to provide reliable support and organization for your lab's test tubes, centrifuge tubes, conicals, and other tubes in the 13–30mm diameter range.
 
It's time to clean out any mushy, moldy old wooden racks left from the 1980s and replace them with easy-to-clean, sturdy and durable, high-quality plastic racks. Are rusty metal racks with peeling colored coatings and broken welds the bane of your lab? Replace them with Nalgene Unwire racks. Don't settle for flimsy knock-offs that won't support the weight of a full load of tubes.
 
You can count on these test tube racks to get the job done right and get your lab refreshed and organized for the important jobs ahead.

Select a Nalgene unwire rack

Replace your metal test tube racks with our most popular plastic racks. Nalgene Unwire Racks have no coating to chip, peel, or rust. These racks are molded in a single piece for exceptional strength and durability. Nalgene Unwire racks securely support a full load of filled test tubes or centrifuge tubes. The smooth finish leaves fewer places for contaminants to hide; no welds to break, no sharp edges, and no assembly required—ready to use. Molded in a variety of bright, fade-resistant colors to help organize your lab and your samples. Endplates accept large labels for easy identification of samples. 

Nalgene Resmer Unwire RacksNalgene Resmer Unwire Half RacksNalgene PP Unwire Racks
Securely supports a full load of filled tubes. Recommended for benchtop, steam sterilization, and water bath useHalf the rack uses half the bench space. Recommended for benchtop, steam sterilization, and water bath useExtra impact strength for room temperature applications
Resmer manfucaturing technologyResmer manfucaturing technologyFilled polypropylene construction
Autoclavable, use to 121°CAutoclavable, use to 121°CDo not autoclave
Does not float in waterDoes not float in waterDoes not float in water
Sizes to hold 13, 16, 20, 25 or 30mm tubesSizes to hold 13, 16, 20, 25 or 30mm tubesSizes to hold 13mm or 16mm tubes 
13mm = 6 x 12 array
16mm = 6 x 12 array
20mm = 4 x 10 array
25mm = 4 x 10 array
30mm = 3 x 8 array
13mm = 6 x 6 array
16mm = 6 x 6 array
20mm = 4 x 5 array
25mm = 4 x 4 array
30mm = 3 x 3 array
13mm = 6 x 12 array
16mm = 6 x 12 array
Green, white, blue, red, yellow, or orangeGreen, white, blue, or redGreen, white, blue, or red

Select a general purpose test tube rack

Nalgene PP Test Tube RackNalgene PC Test Tube RackNalgene PC Test Tube Slant RackNalgene Test Tube Peg RackThermo Scientific
4-way Flipper
Rugged general use rack with keyed tube locations for easy sample identification and retrievalFreezer to autoclave, this rack stays tough through it all. Clear polycarbonate construction allows unobstructed tube viewing; keyed sample locationsDesigned for incubating liquid cultures, or preparing consistent agar slants. Orients tubes at a 5° or 20° angle; keyed sample locationsAllows unobstructed  vertical view of tube contents. Suitable for drying glass plates for electrophoresis and chromatographyCan be oriented to hold four different tube sizes (one size at at time). Ideal for cell culture applications
PolypropylenePolycarbonatePolycarbonateFilled polypropylenePolypropylene
Opaque constructionAllows full view of tube contentsAllows full view of tube contentsAllows full vertical view of tube contentsOpaque construction
Stackable when emptyStackable when emptyStackable when emptyStackable when emptyStackable when empty
HandleHandleHandleNo handleNo handle
Do not autoclaveAutoclavableAutoclavableAutoclavableDo not autoclave
Does not float in water Does not float in water Does not float in water Does not float in water Does not float in water 
Tube locations keyed with numbers and lettersTube locations keyed with numbers and lettersTube locations keyed with numbers and lettersNot keyedTube locations keyed with numbers and letters
Holes in platform allow inverted tubes to drain and dryHoles in platform allow inverted tubes to drain and dryHoles in platform allow inverted tubes to drain and dryMolded-in ribs allow inverted tubes to drain and dryNot designed for tube draining/ drying
Three sizes: hold tubes 13–25mm in diameterThree sizes: hold tubes 13–25mm in diameterTwo sizes: hold tubes 15–16mm or 20mm diameterTwo sizes: hold tubes 10–17mm diameterOne size: each rack holds thirty-two 0.5mL or 1.5mL microtubes, four 15mL or 50mL tubes, each on a different side

13–16mm tubes = 4 x 10 array


16–20mm tubes = 4 x 10 array


21–25mm tubes = 3 x 8 array

13–16mm tubes = 4 x 10 array

16–20mm tubes = 4 x 10 array

21–25mm tubes = 3 x 8 array
15–16mm tubes = 4 x 10 array

20mm tubes = 4 x 10 array
10–13mm tubes = 8 x 12 array

14–17mm tubes = 5 x 10 array
One rack—4 orientations:

0.5mL microtube = 4 x 8 array

1.5mL microtube = 4 x 8 array

15mL conical = 2 x 6 array

50mL conical = 1 x 4 array
WhiteWhite/clearWhite/clearWhite or bluePink, green, or orange

Related products


Resources

Certificate of Compliance

Receive a Certificate of Compliance and Certificate(s) of Irradiation (if applicable) on purchased Thermo Scientific Nalgene and Nunc products.

Start your request 

Support

Need technical support? Contact our expert team for technical and application support of Laboratory Products at technicalsupport@thermofisher.com.