Environmental Simulation

The Discovery My ACS series of temperature and humidity (RH) test chambers is eco-friendly and characterised by the brilliant and innovative design that feature a multitude of benefits. Incorporating the new all-in-one software MyKratos™, this allows users to manage, monitor, and control the chamber through mobile and desktop devices, using WiFi, Ethernet, or GPRS/UTMS connections.

Without compromising on high standards of quality and reliability, ACS wanted to avoid the costs of design and engineering normally associated with the customised walk-in chambers while reducing delivery times to twelve weeks or less. This modular walk-in chamber design is comprised of four basic elements with configurations that can be customised to suit your requirements–a cooling unit, air treatment unit, user interface, and test room.

Accelerated Testing is used to quickly detect any inherent design and manufacturing flaws. The HALT method (Highly Accelerated Life Testing) is mainly utilised to carry out timely corrective actions during the design phase of the product while the HASS method (Highly Accelerated Stress Screening) is performed to detect defects during the production phase of the product.

Benefits:

• Fast design and process maturation
• Reduced total engineering costs
• Reduced production and warranty costs
• Earlier and mature product introduction
• Higher mean time between failures (MTBF)
• Greatly reduced manufacturing screening costs
• Faster corrective action for design problems

Featuring a vibration table with acceleration up to 100 gRMS, ACS Ultra High Stress chambers are the perfect tool to design and verify new generation products that are characterised by robustness and reliability.

ACS chambers for testing aerospace components and products, satellites or equipment used on board the satellites are designed to reproduce the harsh operating conditions that characterise one of the most challenging environments for environmental simulation: space.

The ACS brand has acquired a strong leadership position in the aerospace sector, one of the most challenging environment for simulation. After the first Thermal Vacuum Chamber (TVC) in 1988, Angelantoni became one of the few leading international manufacturers at international level, and a supplier for the most important space research centers testing satellites, subsystems, and components.

The Angelantoni DCTC™ Dry Corrosion Test Chambers carry out incisive stress testing such as “scab” and “filiform” corrosion as well as traditional salt spray tests (continuous, alternate, etc.) in compliance with the main international standards and norms. VDA, SAE J2334, and Kesternich tests are available as standardized options, while DCTC™ can perform any other test on request according to your requirements.

• Top-loading salt solution 
• Height-adjustable feet
• Flowmeter for reading the salt solution flow rate 
• Transparent and ergonomic hood, with powered opening, to prevent drops of salt solution from falling on the specimen