Search Thermo Fisher Scientific
- Contact Us
- Quick Order
-
Don't have an account ? Create Account
Semiconductor Analysis
Semiconductor Laser Ablation
Laser ablation of semiconductors with combined laser and FIB-SEM technology, enabling SEM analysis of 3D packaged devices, OLED and other large geometry samples.
Join the Conversation
48ab - Appl/Samples/Products/Resources/Contact
Shrinking semiconductor geometries have led to increasingly more challenging nodes for pathfinding analysis. This necessitates increased capital expenses and puts greater pressure on new equipment to more rapidly reach entitled yield. Systems that can effectively combine multiple workflow steps into a single solution offer economy of scale to the lab and greater return on investment to the fabrication facility. Also, due to limited floorspace and budget, labs are pushing to have multiple analysis tools combined into a single system, rather than using many different instruments.
Laser ablation has been used to remove layers of material from a solid surface, typically in preparation for further analysis on a secondary tool such as a scanning electron microscope (SEM). A femtosecond laser can be combined with other instruments, such as a DualBeam (a combined focused ion beam and SEM). This offers you a unique in-situ workflow within a single system, eliminating the need for separate tools, as well as reducing cost and occupied lab space. Combining these technologies allows advanced packaging analysis labs to quickly characterize millimeter-scale volumes of material in 3D with nanometer resolution while preserving sample integrity. Using a plasma focused ion beam (PFIB), they can also get accurate large-volume 3D and sub-surface data up to 15,000 times faster than a typical gallium-ion FIB.
Thermo Fisher Scientific offers combined laser and DualBeam tools that couple our best-in-class SEM systems with a PFIB and an in-chamber, femtosecond laser beam. This allows you to perform high-resolution imaging and analysis with in-situ ablation capability, enabling unprecedented material removal rates and fast millimeter-scale characterization at nanometer resolution.
Laser ablation workflow example
This sample was prepared using an in-chamber femtosecond laser and then subsequently polished with a PFIB column.
Laser and PFIB cross section of a steel sample produced by additive manufacturing.
Cross section of a packaged solid-state battery sample prepared by laser ablation.
Close up of a GPU sample milled with a laser and polished using PFIB.
Nylon 6.6 (textile) sample prepared using an in-chamber laser.
Micropillar prepared using laser ablation and PFIB milling.
This sample was prepared using an in-chamber femtosecond laser and then subsequently polished with a PFIB column.
Laser and PFIB cross section of a steel sample produced by additive manufacturing.
Cross section of a packaged solid-state battery sample prepared by laser ablation.
Close up of a GPU sample milled with a laser and polished using PFIB.
Nylon 6.6 (textile) sample prepared using an in-chamber laser.
Micropillar prepared using laser ablation and PFIB milling.
Semiconductor research and development
Innovation starts with research and development. Learn more about solutions to help you understand innovative structures and materials at the atomic level.
Semiconductor metrology
Manufacturing today’s complex semiconductors requires exact process controls. Learn more about advanced metrology and analysis solutions to accelerate yield learnings.
Semiconductor materials characterization
Many factors impact yield, performance, and reliability. Learn more about solutions to characterize physical, structural, and chemical properties.
Semiconductor power devices
Novel architectures and materials pose new challenges. Learn how to pinpoint faults and characterize materials, structures, and interfaces.
Semiconductor Materials and Device Characterization
As semiconductor devices shrink and become more complex, new designs and structures are needed. High-productivity 3D analysis workflows can shorten device development time, maximize yield, and ensure that devices meet the future needs of the industry.
Style Sheet for Instrument Cards Original
Style Sheet for Komodo Tabs
Style Sheet to change H2 style to p with em-h2-header class
Style Sheet for Support and Service footer
Style Sheet for Fonts
Style Sheet for Cards
Electron microscopy services for
semiconductors
To ensure optimal system performance, we provide you access to a world-class network of field service experts, technical support, and certified spare parts.
