Pipet Cleaning Equipment

How it works: 

→ Fill the pipet jar with your desired soaking solution and insert the matching pipet basket. Basket has a perforated bottom to allow filling and draining.
→ Drop soiled pipets into the basket (tip up) and they will fill and soak until the basket is full of pipets and you're ready to wash them. 
→ To wash, transfer the basket of pipets into the pipet washer. Place the pipet washer on the counter next to the sink and attach the fill tube to the water tap; direct the drain tube into the sink drain. Turn on the tap water at a steady rate to fill the washer. Once the washer full, it will automatically empty by siphoning the water down the drain. Allow the washer to refill and drain repeatedly until the pipets are clean (usually 3-5 cycles). Then, turn off the tap and move the water fill tube to your DI water tap. Turn on the DI water and rinse the pipets for three more cycles.
→ When rinsing is complete, turn off the water supply, remove the basket from the washer and allow the pipets to dry.

Ordering guide

* Jar chosen to allow basket handle to fit completely within to allow cover to be placed on jar while pipets are soaking
** Jar in pre-packaged sets is shorter than the basket handle preventing the cover from being used while pipets are soaking.