Fast5 bannner

November 2018

Volume V, Edition 5

The 42iQ gas analyzer offers a unique new feature for automatically adjusting the Photo Multiplier Tube (PMT) gain. Adjusting the PMT allows the user to reset the analyzer back to factory specifications and improve analyzer response. Before beginning this procedure, the user should have a calibration system set up that is capable of generating NOx-free zero-air, and a NOx span concentration at approximately 90% of the analyzer range. For example, if the operating range of the analyzer is 200 ppb, the PMT adjustment should be performed while sampling gas that is at 180 ppb.

Begin by sampling NOx-free zero-air for 10-15 minutes, or until the NO/NOx readings are stable. Perform a zero calibration on the 42iQ:

Calibration>Calibrate Backgrounds>Calibrate NO Background

Press Calibrate to set the NO reading to zero and save the new background

Calibration>Calibrate Backgrounds>Calibrate NOx Background

Press Calibrate to set the NOx reading to zero and save the new background.

Next, navigate to the Home Screen>Calibration>Advanced Calibration>Manual

Calibration>Adjust Span Coefficients> screen and reset the NO and NOx Span Coefficients to 1.000.

Next, generate the 90% NOx span gas with the calibration system and allow the 42iQ to sample the gas for 10-15 minutes or until the NO/NOx readings are stable. Navigate to the following screen:

Home Screen>Settings>Measurement Settings>Advanced Measurement Settings>Reaction Chamber Settings>Continue to PMT Calibration Screen
Screenshot of 48iQ using ePort Software

In the “Target Concentration” field, enter the concentration of the NOx span gas that is being sampled at 180 ppb by the 42iQ.  Press the Start button after the “Auto Calibration” field and wait approximately 5 minutes until the calibration is complete. The PMT will now be optimized for your particular instrument!

 42iQ Instrument Manual



Have an idea for a future Fast5 issue? Let us know ›

Support

Factory repair

Schedule your analyzer, calibrator, probe controller or probe for a Return Material Authorization (RMA) to factory depot repair for complete maintenance and factory specification service.

UX DATA-TRKR Retired - Admins, feel free to remove this reference component.